APLIC 301784 Kurzanleitung Seite 10

6 Hands-free function
You can also use the device as a hands-free unit. For this purpose, the Bluetooth
receiver has to be paired with your Smartphone as described in section "5 Estab-
lishing a connection". Then connect the Bluetooth receiver with an audio input of
your radio or your speakers. Using the "multi-functional button", you can receive
an incoming call or hang up by pressing the button once.
7 Status LED
Activity
Switch on the device
Switch off the device
Bluetooth pairing process
Charging process
Connection established or
device connected
8 Safety instructions and liability disclaimer
Never try to open the device to carry out repairs or conversions. Avoid contact
with mains voltages. Do not short-circuit the product. The device is not certified
for use in the open air; only use it in dry conditions. Protect it from high humidity,
water and snow. Keep it away from high temperatures. Do not subject the de-
vice to sudden changes in temperature or heavy vibration as this might damage
electronic components. Examine the device for damage before using it. The unit
should not be used if it has received an impact or has been damaged in any other
way. Please observe national regulations and restrictions. Do not use the device
for purposes other than those described in the instructions. This product is not a
toy. Keep it out of the reach of children or mentally impaired persons. Any repair or
alteration to the device not carried out by the original supplier, will invalidate the
warranty or guarantee. The product may only be used by persons who have read
and understood these instructions. The device specifications may change without
any separate prior notice to this effect.
10
Status LED
Blue light
Red light
Alternating flashing of red and blue lights
The red LED flashes till the device is fully
charged
The blue LED flashes at regular intervals
English