Clean The Appliance Internally And Externally; Cleaning The Gasket - BERTO’S Low-boy Hinweise Für Installation Und Gebrauch

Low-boy tables
Weekly
–
Clean all the inside parts of the appliance (inside walls, shelves, base and runners).
Monthly
–
Carefully clean the condenser and the refrigerating unit (see the item "Cleaning the condenser, refrigerator
unit and evaporator").
Annually
–
Carefully clean the evaporator and the fans (see the item "Cleaning the condenser, refrigerator unit and
evaporator").
4.2

Clean the appliance internally and externally

–
Carefully clean all the surfaces of the appliance with a soft sponge and neutral detergent.
–
The detergent must not contain chlorine and must be non-abrasive. Before use, dilute the detergent if necessary
according to the instructions on the label.
–
Leave the detergents for the time recommended by the manufacturer.
–
Rinse thoroughly the inner and outer walls of the appliance using a sponge and clean, lukewarm water.
–
Dry carefully using a sponge or a dry, clean cloth.
a
WARNING DANGER
Do not use under any circumstances, tools or instruments that can scratch or cut the surfaces leading to
the formation of rust on the damaged parts over time.
4.3

Cleaning the gasket

The cleanliness of the door sealing gasket (1) is essen-
tial in ensuring the highest performance of the device
in your possession. Product residue, dust and/or ice
crystals that may deposit or form on the gasket must be
constantly removed to guarantee the hermetic closure
of the device and thus avoid dispersion of the cold air.
To clean the gasket use a soft cloth or sponge and luke-
warm water with a non-abrasive detergent.
The gasket can be removed from its place for more ac-
curate cleaning.
m
BE CAREFUL
Make sure that the gasket is dried after cleaning it.
Ed. 12/2020
1
Fig. 22
ENGLISH
71