Cleaning, Care & Maintenance; Technical Specifications - Buffalo DB162 Bedienungsanleitung

Cleaning, Care & Maintenance
• Always turn OFF the appliance and disconnect from the power supply before cleaning.
• Warm soapy water is recommended for cleaning. Cleaning agents may cause damage or leave
harmful residues when used for a prolonged period on stainless steel.
• Dry thoroughly after cleaning.
• A BUFFALO dealer or qualified technician should carry out repairs if required.
Troubleshooting
Fault
Appliance not The unit is not switched on
working
Plug and lead are damaged
Fuse in the plug has blown
Power supply
Bulb has blown
The door is not shut correctly

Technical Specifications

Model Voltage
DB162
230V, 50Hz
DB162_ML_A5_v3 20210125.indb 5 DB162_ML_A5_v3 20210125.indb 5
Probable Cause
Check the unit is plugged in correctly and
switched on
Call BUFFALO agent or qualified Technician
Replace the plug fuse
Check power supply
Replace bulb (Bulb must have a light wave length
of 253.7nm. Please contact your retailer)
Shut the door
Power
H x W x D mm
20W 600 x 510 x 150
Solution
Dimensions
Weight
7.5kg
UK
5
2021/1/25 11:03 2021/1/25 11:03