Troubleshooting - Chattanooga Group Intelect TENS Gebrauchsanweisung

TROUBLESHOOTING

If your TENS unit does not seem to be operating correctly, refer to the chart below to determine what
may be wrong. Should none of these measures correct the problem, the unit will need servicing.
The power indicator lights up but unit does not function properly.
Please turn both amplitude control switches off, then turn on again.
Check all control settings. Are they set to values prescribed by your medical professional?
Are electrodes in proper position?
Check lead wires. Be sure all connectors are firmly sealed.
Be sure you are using the proper amount of gel. Too much or too little can cause problems.
Replace cord set with another to check for broken wires.
"On" and "Battery Light" are dim.
Replace battery.
None of the indicators light up.
Replace battery.
To obtain service, contact your supplier.
15