Fm Radio - MAJORITY FULBOURN II FUL-DAB-BLK-2 Bedienungsanleitung

Instructions Guide

FM Radio

FM Scan
Press the 'Mode' button (Ref.3) to switch to between DAB, FM,
Bluetooth and AUX-in. The first time you do this, FM frequency
"87.50MHz" will be displayed on the screen.
Ensure that the antenna is fully extended so that the best signal
is being received for the radio scan (Ref.15).
To auto scan up the bandwidth, press and release the 'Scan/Pair'
button (Ref.5). This will start scanning up the frequency band
and play the first station it finds with a strong signal.
To autoscan down the frequency band, press and hold the 'Scan/
Pair' button (Ref.5) for a few seconds.
The radio will display station information when you press the
'Info' button (Ref.4). Press multiple times to view all information
available (See page 14).
When you turn the radio on again after it switching off, it will
automatically tune to the same station (DAB or FM) that was last
selected.
How to tune a frequency manually
To listen to a specific frequency, you can manually scroll up and
down the bandwidth using the Navigation/Select dial until on
your chosen station.
11