Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Universal fence adjustments
1. Check if fence is square against saw blade with
a try square.
2. If necessary, loosen fixing screws and adjust
mitre scale.
3. Retighten fixing screws.
Cleaning the saw
1. Lay machine on its side.
2. Remove chips and saw dust with vacuum
cleaner or brush:
- from saw blade setting guide elements
- from motor vent slots
Machine transportation
· Lower saw blade completely before transporta-
tion.
· Use original packing, if possible.
Machine storage
A
Danger!
Store machine so that
- it can not be started by unauthorized per-
sons, and
- nobody can get injured.
3
The on/off buttons can be blocked with a pad-
lock.
A
Caution! Do not store machine outdoors or in
damp environment without protection.
PK 255
45
Service plan
Before switching ON
- Chip
ejection
(when
operated
without dust collec-
tion) and
- table slot
Riving knife
Monthly (if used daily)
Clean guide elements
for saw blade setting
- threaded rods for
blade rise and fall;
- swivel segments.
Power cable
Every 300 hours of operation
Saw blade drive belt
All screwed connec-
tions
Visual check if unob-
structed by chips.
Visual check if dis-
tance saw blade – riv-
ing knife is 3...8 mm.
- Remove chips with
vacuum cleaner or
brush;
- apply light coat of
oil to guide ele-
ments.
Check for damage, if
necessary have
replaced by a qualified
electrician.
Check tension (R 5
mm)
Check, retighten if nec-
essary (except saw
blade longitudinal shift
setting screws).
2.13
Quicklinks ausblenden:
Werbung
Inhaltsverzeichnis
