Radio Signal; Technical Data - Rollei Soluna 200Bi Anleitung

10

Radio signal

• To operate the LED light with a remote control or to control
several LED lights simultaneously, you can adjust the radio sig-
nal by briefly pressing the radio signal/Bluetooth* button and
turning the adjustment knob. The radio signal indicator flashes.
• There are three settings here, "6", "P" and "Off": The signal
"6" can be used to control the LED light with a compatible
remote control which is not available from Rollei (e.g. Jinbei
TR-V6 – restricted functions). With the "P" signal, your LED light
is compatible with the separately available LED radio remote
control. "Off" indicates that the radio signal is switched off.
• By pressing the radio signal/Bluetooth* button again, the group
display starts flashing and you can set one of 16 groups (A – J /
L / O / P / Q / S / U) using the rotary knob.

Technical data

Soluna 200Bi
Light source
Power
Power control
Illuminance at 0.5 m
Colour temperature
Colour Rendering Index
Television Lighting Consistency Index
Radio receiver
Bluetooth* function
Lighting effects
Further equipment
Power supply
Battery life
Dimensions | Weight
Box Content
Note: Lux were measured at a distance of 0.5 meters.
Technical details are subject to change without notice. Misprints and errors excepted.
Reproduction of these operating instructions – even in part – is not permitted.
*The Bluetooth word mark and logos are registered trademarks of the Bluetooth SIG, Inc. and any use of such marks by Rollei is under
®
license. Other trademarks and trade names are the property of their respective owners.
LED, > 10,000 h service life
200 W
0 – 100 %, in 1 % steps
> 19.900 lx (2700 K)
> 30.700 lx (4200 K)
> 22.500 lx (6500 K)
2700 – 6500 K in 100 K steps
Ra > 97 (CRI)
> 97 (TLCI)
Integrated | 2.4 GHz | 32 channels (00 –31) | 16 groups (A – J / L / O / P / Q / S / U)
App operation
TV | Flickering Bulb | Fireworks | Thunderstorm mode 1 / 2 / 3 | Blink mode 1 / 2 / 3
LC display | Umbrella holder | Bowens S-type adapter | Tripod attachment | Carrying handle |
Cooling (can be switched off with a maximum power of 30 %)
100 – 240 V | 50 / 60 Hz | Fuse 4 A | Battery operation possible with 1 or 2 V-mount batteries
(max. 14.8 V each) – not included in delivery
1 V-Mount battery 190 Wh:
100 % output: 65 min
50 % output: 130 min
10 % output: 650 min
2 V-Mount batteries 190 Wh:
100 % output: 80 min
50 % output: 160 min
10 % output: 800 min
28 x 18.5 x 13.5 cm | 3.5 kg without batteries
Rollei Soluna 200Bi LED continuous light, power cord, protective cap, instructions
ENGLISH
• Pressing the Radio Signal/Bluetooth* button again will make
the channel indicator blink and you can set one of 32 channels
(00 – 31) using the control knob.
• Confirm the settings by pressing the adjustment knob.
• When using radio remote controls, please note that the radio
channel and group must be set identically on each of the LED
permanent lights and on the remote control for correct opera-
tion. It is also possible that not all functions can be set with the
remote control.
• Please note that the radio frequency (2.4 GHz) used by these
devices is shared with other users/devices. Interference cannot
be ruled out due to this. If necessary, change the radio channel
to avoid interference.