Time Reservation; Additional Functions; Displaying Information - AEG KRC 4330 DVB-T Bedienungsanleitung

Time Reservation

The receiver can be programmed to switch to a
specific channel at the desired time. Furthermore,
you can programme the receiver in a way that it
switches on or off or that a short message is
displayed at a specific time.
Set the timer as follows:
 In the "SETUP" menu select the "Advance Timer"
submenu.
 Use the arrow buttons "▼ CH-" or "▲ CH+" to
select a free timer position.
 Press the "red" button (Add) to call up the editing
window.
 Select the individual lines using the "▼ CH-" or
"▲ CH+" arrow buttons.
 Adjust the settings with the "
arrow buttons and the number buttons.
 Press the "OK" button to activate the timer.
 Press the "EXIT" button in order to return to the
TV programme.
NOTE:
With the "green" button (Del) you can delete a
timer storage location.
Game
You can choose between the "Gomoku" game
and the "Calendar" and "Calculator". Make your
selection and follow the instructions at the bottom
edge of the screen.

Additional functions

Displaying information

NOTE:
This function is only available if the station broad-
casts corresponding data.
You may display the following information on the
current channel.
 To display additional information on the screen,
press the "INFO" key.
NOTE:
Press the "INFO" button twice in order to display
details on the current programme such as fre-
quency, band width, etc.
 To return to the normal screen display, press the
"INFO" key again.
Show Channel List
 Press the "OK" key to view the list of TV of radio
 Now mark a station using the "▼ CH-" or
 To switch to the marked station, press the "OK"
 Press the "EXIT" button, in order to return to the
Show Favorite List
 To call up the list of your favourite stations, press
 Select the desired group of favourites by repea-
VOL+" and " VOL-"
 Use the "▼ CH-" and "▲ CH+" arrow keys to
 Press the "EXIT" button, in order to return to the
Displaying teletext/Using the Search Function
 To call up teletext, press the "TEXT" key during
 Use the "▲ CH+" and "▼ CH-" arrow buttons to
 Press "OK".
 Enter the desired page number using the nume-
 In order to use the teletext search function, press
 Start the search by pressing the "OK" button.
 After the search has finished you can use the
 In order to exit the search function, press the
 In order to exit the teletext again, press the "EXIT"
channels (depending on the type of use).
"▲ CH+" arrow keys.
key.
normal screen display.
the "FAVOR" key during operation.
tedly pressing the "yellow" button.
NOTE:
This function can only be used if you have defined
a list of favourites (see page 30).
select the desired station.
normal screen display.
operation.
select the desired teletext language.
rical keys.
NOTE:
This function can only be used if the station which
is set offers teletext.
the "TEXT" button again. Use the number and
arrow buttons to enter the desired search term.
The device searches through the teletext of the
channel that is set for the search term.
arrow keys "▼ CH+, ▼ CH-" to select the teletext
pages found. Confirm your selection with the "OK"
button.
"EXIT" button.
button again.
English
33