DigitalLife AV205 Bedienungsanleitung Seite 5

Record in Auto Mode
■
AV205 will auto detect each interval between 2 songs, and save them into 2 files in Auto mode. If
you have 6 songs at Side A (or B) on your cassette tape:
1. Put in the cassette and press Play, and then press Record.
2. After 6 songs were played; it will automatically save 7 mp3 files in your USB.
 The FV0001 - FV0006 will be the mp3 for 6 songs, and FV007 is an empty one due to the short
silence between the end of the 6th song to the end of the tape.
3. A folder named "TAPMP3" will be created in your USB and name each mp3 as "FV0001" to
"FV9999".
4. If you want to switch back to Manual mode from Auto mode, Stop recording (or Playback) to
Standby mode (Blue LED is steady ON). Long press ▶▶ button for 3-5 seconds, till you see the LED
changes from Blue to Green. Or simply power off AV205 and turn the power on again (it will start in
default setting -- Manual mode).
Record via AUX Port
■
You can record music from other audio sources with a 3.5mm audio cable (3-position).
Playback
■
The AV205 has Playback function so you can always check the recorded files.
1. At Standby mode, press the Playback button, AV205 will start to play the recorded music. (LED
will flash slowly.)
2. Press Playback button again will stop Playback and return to Standby mode.
3. During Playback, use Up/Down button to play previous or next file.
Notice - You can also playback any other mp3 files in the USB flash drive in the "TAPEMP3" folder.
Copyright and Trademarks
Digitallife is a trademark of Shenzhen Shi QiHeng DianZi ShangWu YouXian GongSi, registered
in the EU and other countries. All other trademarks and trade names are the property of their
respective owners.