Special Instructions - clearaudio electronic Talismann V2 Gold Bedienungsanleitung

User manual / Bedienungsanleitung

4. Special instructions

• Before playing a record, please remove all dust and dirt from the
record's surface using a quality cleaning device. For the best results,
a record cleaning machine should be used.
Ask your dealer about Clearaudio´s record cleaning machines.
• Always keep the stylus tip clean. When dirt is allowed to build up
and records are played with a dirty or clogged stylus, a buzzing noise
may be heard. Use a soft brush or a high quality cleaning brush or
Clearaudio cleaning fluid (Art. No. AC003) to clean the stylus tip.
Be extremely careful and always brush only from back to front. When
using a liquid e.g. from Clearaudio or other organic cleaner, always
take care not to spill any on the cartridge body. Make sure the liquid
only contacts the stylus tip or boron cantilever. Avoid storing the
cartridge near devices with electrical transformers and motors that
can generate magnetic fields. Any demagnetization could lead to a
loss of the output voltage and thus to a distortion or deterioration
of the sound.
• Please note:
Never disconnect your tonearm cable from your pre-amplifier while
your unit is still on. Please switch your pre-amplifier off before
starting to disconnecting your tonearm connectors from the phono
inputs of your pre-amplifier.
• Always use the original packaging when shipping the cartridge and
secure the stylus guard with a rubber band.
If any service or repair to a Clearaudio product is necessary, please
•
contact your dealer / distributor.
We can advise you of your nearest service location.
Page / Seite 8
© clearaudio electronic GmbH