How To Power On - KingSlim D1 Pro Schnellstartanleitung

English English

HOW TO POWER ON

1. Insert the car charger into the car's cigarette lighter socket.
2. Connect the car charger to the dash cam's mini USB port.
(Charger input: DC 12-24V, Output DC 5V 2A)
Note:
① After powering on the dash cam through the car charger, the dash cam will
automatically turn on and start recording (if the card has been inserted).
To change settings, please firstly stop recording.
② Please charge for 30 minutes before using this dash cam powered by the built-in
battery.
③ When the dash cam is connected to the car's cigarette lighter socket through the
car charger, the built-in battery will be charging at the same time. The indicator
light glows solid red when charging, and goes off when fully charged.
④ The built-in battery is only used to power the "parking monitor" function.
In normal use, please plug the car charger into the cigarette lighter of the car to
power the dash cam. The built-in battery is not recommended as a normal power
supply for the dash cam. This is to avoid parking monitoring failure caused by
running out of battery while the car is parked.
⑤ The camera can also be powered by connecting it to a power source such as your
DC 5V phone adapter via the USB cable.
When charging, please shut down the camera by long pressing the power button.
Tips:
① Blue flashing light means the camera is recording.
② Red light means the camera is charging.
③ Blue light means the camera is working.
2
D1 Pro
5
1