Formatting The Microsd Card - KingSlim D5 Anleitung

English English
3. Install the D5 Dash Cam on the windshield.
① Clean the windshield with a dry cloth.
② Remove the static sticker film and apply the sticker to the windshield while
making sure there are no air bubbles.
③ Peel off the film on one side of the double-sided adhesive tape and apply the
tape to the D5 Dash Cam.
④ Peel off the film on the other side of the adhesive tape and press the D5 Dash
Cam firmly to secure it on the static sticker (if you wish to remove the dash cam,
please take off the static sticker).
Note: You can stick the dash cam to the windshield without using the static sticker.
Static Sticker
Cable Clip
4. Adjust the viewing angle of the dash cam accordingly.
5. Connect the car charger to the dash cam. Plug the car charger into the cigarette
lighter.
6. Use the pry tool to hide the cables.

Formatting the MicroSD Card

Please format the microSD in the camera before using this dash cam.
Tip: Do not remove or insert the microSD card when the dash cam is turned on as
this may damage the card.
4