Philips AVENT SCD841 Bedienungsanleitung Seite 21

1
VIDEO 20°C
Sensitivity
Low
Medium
High
Very High
1
VIDEO 20°C
Sensitivity
Low
Medium
High
Very High
1 1
VIDEO 20°C 20°C
Sensitivity
Low
Medium
High
Very High
1 1
VIDEO 20°C 20°C
Sensitivity
Low
Medium
High
Very High
Sensitivity
The sensitivity level of the baby unit defines what you hear through the
parent unit. When the level is set high, you will hear many sounds, including
soft background sounds. When the sensitivity level is set low, you will hear
only the louder sounds.
1 Press the right part of the control button to access the sensitivity levels.
Note: When pressing the left part of the control button again, you will
leave the menu.
2 Press the top or bottom part of the control button to select the desired
sensitivity level.
If your baby only makes soft sounds, the sensitivity of the baby unit
needs to be set to a high sensitivity level on the parent unit.
The louder your baby sounds, the lower the sensitivity can be set on the
parent unit.
Note: In AUDIO and VIDEO mode, you will have continuous sound when
the sensitivity level is on 'very high'. Otherwise, low sounds will be muted.
Tip: The sensitivity level can be adjusted so you will always hear your
baby without the disruption of other sounds. When there is a lot of
background noise, turn the sensitivity lower so you will not hear these
sounds through the parent unit.
3 Press the left part of the control button to save the new setting and to
return to the main menu.
21
English