Listo CAL 145-55b3 Bedienungsanleitung Seite 24

g
etting stArted
• Before plugging into the electrical outlet for the first time, leave the
appliance in place for 2 hours, to allow the refrigerant gas to settle in the
compressor. Not respecting this waiting period may damage the compressor.
• Plug the appliance into an earthed mains socket.
s
etting the temperAture
The thermostat button switches the appliance on and off.
Adjustment to the mark
IMPORTANT: Every time the appliance is shut down, wait 5 minutes before
switching it on again, so as not to damage the compressor.
• We advise you to set the thermostat to the "NORMAL" mark for normal everyday
use. This setting is appropriate for storing frozen food and maintains the
temperature in the freezer at -18°C.
• Do not open the door of the appliance for the first 30 minutes. Leave the freezer
running empty for about 1 to 2 hours (depending on the room temperature).
• In order to use the freezer when the appliance is first switched on or after a
prolonged shutdown, set the thermostat to the "MAX" mark for about 2 hours
before adding the frozen and deep-frozen products. Then turn the thermostat
back to its usual position.
• The temperature inside the appliance is a function of several factors, such as
V.1.0
MAX
MIN
USAGE
Highest temperature
Lowest temperature
24
Corresponds to
Hottest setting
Coldest setting