SIXTOL Vulcan Gebrauchsanweisung Seite 3

Use
1. Turn to remove the diffuser cover
2. Connect the power adapter connector on the bottom
of the base
3. Make sure the power cord is unplugged
4. Pour water into the container up to the maximum level
line using a measuring cup
5. You can drip a few drops of essential oil into the water,
about 2-3 drops per 100 ml
6. Replace the diffuser cover
7. Plug in
8. Press the "MIST" button to select the diffuser
operation time (1H, 3H, 6H, ON continuous operation),
Hold down the "MIST" button to select the steam
intensity.
9. To switch off the diffuser, press the "MIST" button 5
times
10. Use the "LIGHT" button to select the lighting color
11. Start the diffuser (during the first start-up, steam
production may take approx. 3-10 minutes)
Note
• During operation, the amount and intensity of the mist
discharged can be changed for some types of diffusers
• If there is not enough water in the tank, the appliance
switches off automatically
2