RUSTA 902511630101 Gebrauchsanweisung Seite 6

ENG
HOW TO BURST STEAM
Set the temperature control at the "..." position, then press down the bursting steam button,
the base plate will spray out bursting steam.
HOW TO DRY CLEAN
1. Turn the temperature control to "OFF" position, turn off the steam button and put the
plug into the socket.
2. Turn the temperature control to the suitable position which the ironed clothes required,
the indicator bulb will light up, then put the iron on the smooth and stable place vertically.
3. After the indicator goes out, you can begin to iron.
HOW TO SPRAY
Turn on the spraying button, steam will be sprayed out from the spraying nozzle. At that
time, you should keep enough water in the water tank.
HOW TO SELF CLEANING
Set the temperature control to the maximum position, press the self clean button for
about 1 minter, strong steam will be sprayed to clean the steam chamber. Use the function
once every two weeks.
HOW TO ANTI-DRIP
This iron is equipped with a drip stop function: the iron automatically stops steaming
when the temperature is too low to prevent water from dripping out of the soleplate.
HOW TO ANTI-CALC
The Anti-calc function filtrate the minerals from the water to prevent mineral residue
build up at the steam chamber.
STORAGE
After using, pull out the plug, pour out the remaining water, turn the steam control to
minimum, turn the temperature control to "min", let the iron cool down, put the iron on
the safe and dry place vertically.
6