Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
PRODUCT DESCRIPTION
1. Temperature button unit
2. LCD display
3. HEAT ON mode indicator
4. Indicator of the active mode of displaying the current temperature of the tip
5. Indicator of the active mode of displaying the set temperature
6. Switch for displaying the active temperature displayed mode
7. Temperature set knob.
OPERATION
1. Place the soldering station on stable, flat ground.
2. The stand should be inserted into the dedicated hole on the station.
3. Plug the soldering station into a power outlet and switch it on using power
switch
4. Before the first use, tin the soldering tip. To do this, turn on the soldering iron,
melt a small amount of tin and stick it to the tip.
Note: It is not recommended to use the soldering iron for a long time with the
maximum temperature of the soldering tip.
5. Use temperature control knob to set temperature.
6. If the tip temperature is lower than the set point, the HEAT ON indicator will be
lit.
7. After finishing work, turn off the station with temperature control knob and wait
for the soldering iron to cool down.
Note: After finishing work, it is recommended to leave a small amount of tin on the
soldering tip - it serves as a protection for the tip until the next use.
EN
6
Cleaning and maintenance
1. Before cleaning the device, make sure that the device is unplugged from power
mains.
2. Clean this device with soft, slightly damp cloth. Do not use solvents or other
cleaning agents.
3. If the tin is poorly adhered to the soldering tip, clean it with fine sandpaper and
then reapply a thin layer of tin over it.
SPECIFICATION
Nominated power
48 W
Soldering tip temperature 150 - 480ºC
Station voltage
230 V AC; 50 Hz
Dimensions
170 x 120 x 90 mm
Weight
1500 g
Stand, soldering iron, users
In set
manual
LEARN MORE
For more information on this device visit: www.rebelelectro.com.
Read owner's manual carefully before using your device.
Visit www.rebelelectro.com website for more products and accessories.
English
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment
(Applicable in the European Union and other European countries with separate collection systems) This marking
shown on the product or its literature, indicates that it should not be disposed with other household wastes at the
end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste
disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable
reuse of material resources. Household users should contact either the retailer where they purchased this product,
or their local government office, for details of where and how they can take this item for environmentally safe
recycling. Business users should contact their supplier and check the terms and conditions of the purchase
contract. This product should not be mixed with other commercial wastes for disposal.
Made in China for LECHPOL ELECTRONICS Sp. z o.o. Sp.k., ul. Garwolińska 1, 08-400 Miętne.
7
EN
Werbung
Inhaltsverzeichnis
