Renkforce RF-TBD-100 Bedienungsanleitung Seite 3

Operating Instructions
RF-TBD-100
Thermal Binding Machine
Item No. 2267643
Intended use
The product is a thermal binder for DIN A4 (80 g/m
It is intended for indoor use only. Do not use it outdoors. Contact with moisture, e.g. in bath-
rooms, must be avoided under all circumstances.
For safety and approval purposes, you must not rebuild and/or modify this product. If you use
the product for purposes other than those described above, the product may be damaged. In
addition, improper use can result in short circuits, fires, electric shocks, or other hazards. Read
the instructions carefully and store them in a safe place. Make this product available to third
parties only together with its operating instructions.
This product complies with the statutory national and European requirements. All company
names and product names are trademarks of their respective owners. All rights reserved.
Delivery content
• Thermal binder • Operating instructions
Up-to-date operating instructions
Download the latest operating instructions at www.conrad.com/downloads or
scan the QR code shown. Follow the instructions on the website.
Explanation of symbols
The symbol with the lightning in the triangle is used if there is a risk to your health,
e.g. due to an electric shock.
The symbol with the exclamation mark in the triangle is used to indicate important
information in these operating instructions. Always read this information carefully.
This symbol indicates that this product is built according to protection class II.
Hot surface! This symbol warns you about touching a hot surface.
This product must only be used in dry, enclosed indoor areas. It must not become
damp or wet, as this may cause a fatal electric shock!
The arrow symbol indicates special information and advice on operation.
Safety instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information on
proper handling in this manual, we assume no liability for any resulting per-
sonal injury or damage to property. Such cases will invalidate the warranty/
guarantee.
• The appliance is not to be used by children or persons
with reduced physical, sensory or mental capabilities,
or lack of experience and knowledge, unless they have
been given supervision or instruction concerning the
safe use of the appliance and understand the hazards
involved.
• Children must not play with the appliance.
• To prevent risks, damaged mains cables must be re-
placed by the manufacturer, an authorized repair cen-
tre, or a qualified electrician.
a) General information
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. This may become dan-
gerous playing material for children.
• Protect the appliance from extreme temperatures, direct sunlight, strong jolts, high
humidity, moisture, flammable gases, steam and solvents.
• Do not place the product under any mechanical stress.
) paper.
2
• If it is no longer possible to operate the product safely, take it out of operation and
protect it from any accidental use. Safe operation can no longer be guaranteed
if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
• Please handle the product carefully. Jolts, impacts or a fall even from a low height
can damage the product.
• Consult an expert when in doubt about the operation, safety, or connection of the
appliance.
• Maintenance, modifications, and repairs must only be completed by a technician
or an authorised repair centre.
• If you have questions which remain unanswered by these operating instructions,
contact our technical support service or other technical personnel.
• Trained personnel must supervise the use of electrical appliances in schools,
training facilities and DIY workshops.
• For installations in industrial facilities, follow the accident prevention regulations
for electrical systems and equipment issued by the government safety organisa-
tion or the corresponding authority for your country.
b) Electrical safety
• The mains socket must be located near to the device and be easily accessible.
• The product must only be powered by a standard mains socket connected to the
public grid. Before plugging in the product, check that the voltage indicated on the
product corresponds to the voltage of your electricity supplier.
• Never unplug the mains plug by pulling on the cable. Always use the grips on
the plug.
• Unplug the mains plug from the mains socket if you do not plan to use the product
for an extended time.
• For safety reasons, unplug the mains plug from the mains socket during a thun-
derstorm.
• Make sure that the mains cable is not squeezed, bent, damaged by sharp edges
or subjected to mechanical stress. Avoid excessive thermal stress on the mains
cable from extreme heat or cold. Do not modify the mains cable. Failure to adhere
to these instructions may lead to damage of the mains cable. A damaged mains
cable can cause a fatal electric shock.
• Do not touch the mains cable if there are any signs of damage. Power down the
respective mains socket (e.g. via the respective circuit breaker), and then carefully
unplug the mains plug from the mains socket. Never use the product if the mains
cable is damaged.
• Never plug in or unplug the mains plug when your hands are wet.
• Never use the product immediately after it has been brought from a cold room
into a warm one. This may cause condensation to form, which can destroy the
product. Allow the product to reach room temperature before use. This may take
several hours.
• Never pour any liquids over electrical devices or place objects filled with liquid next
to the product. If liquid or an object does get inside the device, power down the
respective socket (e.g. switch off the circuit breaker), and then remove the mains
plug from the mains socket. Discontinue use and take the product to a specialist
repair centre.
c) Product
• Binding slot:
- Always keep it clean.
- Never allow foreign material to enter.
- Keep long hair, neckties, jewellery, scarves, and loose clothing away.
• Do not cover the product during use.
• Always switch the product OFF and disconnect from the power supply when fin-
ished using.
• Store the product only when it has cooled down completely.