Sartorius Arium Bagtank 20 Installationsanleitung Seite 9

Wall Mounting Bracket for Arium
An optional wall mounting bracket (H2O-ATB) is available for Arium
tank 20 system installation.
CAUTION
The wall mounting bracket for the Bagtank 20 can only be used for moun-
ting and attaching the Arium
the bracket. When mounting the unit on a wall, make sure that the moun-
ting surface and fasteners selected are capable of supporting a minimum of
100 kg (220 lbs). Inadequate support and | or fasteners may result in injury
to the operator and damage to the equipment.
Fig. 3: The figure shows the wall mounting bracket with an attached Arium
Wall installation:
− Use the pre-drilled slotted holes in the wall mounting bracket to mount
the bracket to the wall.
− Fasten the wall mounting bracket to the wall using suitable screws and
dowels (ensure that it is horizontally aligned).
− Position the Arium Bagtank 20 on the wall mounting bracket attached
®
to the wall. The device feet on the Bagtank can be used for proper align-
ment of the Bagtank on the wall mounting bracket. They must fit into the
holes on the wall mounting bracket without being jammed or wedged.
− Secure the Arium Bagtank to the wall mounting bracket. Use the screws
®
provided for this.
CAUTION
Arium Bagtanks are heavy!
®
Two people should be used to lift and mount the Arium
wall mounting bracket.
Bagtank 20
®
Bagtank 20. Do not add additional load to
®
Installation Instructions Arium
Installation
Bag-
®
Bagtank 20
®
Bagtank onto the
®
Bagtank 9
®