Vivanco SD 3-N Bedienungsanleitung Seite 15

Changing the battery
1.Open the case by turning the lid anticlockwise.
2.Lift the old battery from the battery compartment and carefully pull out the battery clip of
the battery contacts.
3.Clip a new 9V battery firmly to the battery clip and insert the battery into the battery
compartment.
4.Reconnect the device with its housing base by plugging the holding clips of the housing
base into the appropriate slots on the device and turning it clockwise.
5.Perform a functional test, press the test button and listen for the beep to ensure the
functioning of the device.
Producing an escape plan
Please work with all occupants of the property to produce an escape plan with escape
routes. Be sure to consider whether, in the event of a fire, potential escape routes could
be obstructed by obstacles. In addition, the escape routes should be the fastest and
safest way into the open air.
Emergency measures when the alarm sounds
Leave the house or apartment immediately followingthe escape plan you have produced.
Every secondcounts, so do not waste time by getting dressedor collecting valuables.
When leaving a room, do not open any doorwithout first touching the surface. If itis hot
or if you see smoke flow in under the door,do not open the door! Insteaduse the
alternative escape route. If thesurface of the door is cool, press yourshoulder against it,
open the door slightly and beready to slam it shut if heat andsmoke start coming in.
15