Power Supply; Rollei Lumen App; Cct - Color Temperature Mode - Rollei Lumen Ring RGB Anleitung

Power supply

• Use with power supply unit: Please plug the supplied power
supply unit into the mains socket. Slide the power switch to the
" " symbol to turn on the LED light.
• Use with rechargeable batteries: Please insert the supplied
rechargeable batteries into the battery compartment and slide
the power switch to the "
• Note: Please fully charge the batteries before first use. Always
use the original charger to charge the batteries.
CCT – Color Temperature Mode
Adjust color temperature and brightness:
• Press the "CCT / Color Temperature" button after switching
on. Turn the adjustment knob to the right or left to increase or
decrease the Kelvin value.
The menu item "CCT" is highlighted in the display.
• The color temperature can be set between 3200K and 9999K in
steps of hundred Kelvin.
• Press the "CCT / Color Temperature" button again to increase
the green portion of the selected color temperature. On display,
the menu item "GN" is highlighted and the green component
can be adjusted to the lighting situation by turning the control
knob.
• The brightness can be adjusted between 0% and 100% by pres-
sing and then turning the adjustment knob (steps: 20%, 21%,
22%, 23%, 24%, 25%,...).
The menu item "BRT" is highlighted in the display:
" symbol to turn on the LED light.

Rollei Lumen APP

Download the "Rollei Lumen" app directly from the App Store or
the Google Play Store (iOS 9.0 or higher, Android 5.0 or higher)
Connection with the smartphone
1. Activate Bluetooth * on your smartphone
®
2. Switch on the Rollei Lumen Ring RGB
3. Open the "Rollei Lumen" app, the connection to your phone
will be established automatically.
Note:
• The connection is established using "Bluetooth Low Energy"
(BLE). For this, a location release of the app is required. The
connection to the LED light is established directly in the app.
Download on the
Save color temperatures and brightness:
You have the possibility to save up to 8 different color profiles.
• Select your desired color temperature and brightness.
• Then press the Menu button and select the "Preset Temp"
menu by turning the adjusting knob. Press the adjustment knob
again to select the function.
• Now turn the adjustment knob to select the different memory
locations.
• To save the preset color temperature and brightness, press the
adjustment knob once.
• To recall the stored settings, press the Menu button and select
the "Preset Temp" menu and choose the memory location with
the adjustment knob.
• To exit the "Preset Temp" menu, press the Menu button.
9