Use Only In Office-Type Indoor Setting - Elditest GE Serie Benutzerhandbuch

Elditest
Hazardous Contact
WARNING

Use Only in Office-Type Indoor Setting

These probes are designed to be used in office-type indoor environments. Do not
operate:
•
In the presence of noxious, corrosive, flammable fumes, gases, vapors,
chemicals, or finely-divided particulates.
•
In environments where there is a danger of any liquid being spilled on the
probe.
•
In air temperatures exceeding the specified operating temperatures.
•
In atmospheric pressures outside the specified altitude limits or where the
surrounding gas is not air.
Only Qualified Personnel
These probes are intended for personnel who are trained, experienced, or otherwise
qualified to recognize hazardous situations and who are trained in the safety
precautions necessary to avoid possible injury when using such
a device.
Must be Grounded
CAUTION
6
To avoid injury, remove jewelry such as rings, watches, and other
metallic objects. Do not touch exposed connections and
components when power is present.
Use only with test instruments having their BNC input
connected to earth ground. Always properly ground the
oscilloscope probe with its ground lead before connecting to
circuits. Always disconnect the probe from circuits before
disconnecting the ground lead. Do not connect the probe
ground lead to any point which is at a potential other than earth
ground.
www.sefram.com