Safety Summary - Elditest GE Serie Benutzerhandbuch

Disposal
(Applicable in the European Union and other European countries with
separate collection systems). This product is subject to Directive
2012/19/EU of the European Parliament and the Council of the
European Union on waste electrical and electronic equipment (WEEE),
and in jurisdictions adopting that Directive, is marked as being put on
the market after August 13, 2005, and should not be disposed of as
unsorted municipal waste. Please utilize your local WEEE collection
facilities in the disposition of this product.
CE Compliance
This product meets the essential requirements of the applicable European Directives as
follows:
•
Low-Voltage Directive (safety): 2014/35/EU
Standard IEC/EN61010-031:2015 (Second Edition)
•
Restriction of Hazardous Substances Directive (RoHS): 2011/65/EU
Standard EN50581:2012

Safety Summary

To avoid personal injury and/or product damage, review and comply with the
following safety precautions. These precautions apply to both operating and
maintenance personnel and must be followed during all phases of operation, service,
and repair of this probe.
Comply with Voltage Derating Curve
WARNING
Dry Conditions
WARNING
When measuring higher frequency signals, be sure to comply
with the Voltage vs Frequency Derating Curve. Do not apply to
the input any potential that exceeds the maximum rating of
the probe.
Hands, shoes, floor, and work bench must be dry. Avoid making
measurements under humidity, dampness, or other
environmental conditions that might affect safety.
www.sefram.com
Elditest
5