Tenveo NV Serie Bedienungsanleitung Seite 10

( ) 3 Level III Menu -Image Enhancement
Denoise: 2D noise reduction /3D noise reduction switch
Sharpen: Sharpness adjustment function
Gamma: Gamma adjust switch
Defog: Defogging: the defogging strength is calculated automatically according to the manual/automatic specified strength
coefficient.
Sat: Adjust the image color effect.
Col Tone: Color tone adjustment interface. The video output result is independent of the color temperature.
VoCsc: VD outputs brightness values,hue values,saturation values, and contrast values.
Drc: Dynamic range adjustment
Dci: Adjust image contrast and brightness dynamically
3.Level II Menu - Display
Display
Language
Language: Support Chinese/English
5.Level II Menu – System
System info: Firmware version and time
Exit Type: Save / Not save / Default
(Select here to determine to save all parameters been adjusted or not.)
Image Enhancement
Denoise
Sharpen
Gamma
Defog
Sat
Col Tone
VoCsc
Drc
Dci
4.Level II Menu - Lens
English
Focus mode: Support auto and manual 2 modes
Range of focus: Determined by the lens used in the model .
Zoom save: When the camera is turned on, restarting the
camera will initialize to the position which was shutdown in last time.
System
SYSInfo
Exit Type
Lens
Mf/Af
Af--R
ZoomSav
Save
6
Af
>4.0M
Off