Herunterladen Diese Seite drucken

Camco STEELFLEX Orginal-Betriebsanleitung Seite 3

Werbung

EG-Konformitätserklärung
EC Declaration of conformity
im Sinne der EG-Richtlinie 2006/42/EG Maschinenrichtlinie.
according to the EC Directives 2006/42/EC machinery directive.
Name und Anschrift des Inverkehrbringers:
Name and address of the distributor:
CAMCO Produktions- und Vertriebs-GmbH
für Beschallungs- und Beleuchtungsanlagen
Fischpicke 5
D-57482 Wenden
Deutschland
bestätigt, dass das Produkt
hereby confirms that the product
Steelflex Drahtseil Rundschlinge GAC60
Steelflex Wire Rope Roundsling GAC60
der Richtlinie 2006/42/EG ( Machinenrichtlinie ) entspricht.
complies with directive 2006/42/EC ( machinery directive ).
Angewandte Normen:
Applied norms:
- EN13414 Teil 3 Anschlagseile aus Stahldrahtseilen – Sicherheit – Teil 3: Grummets und
Kabelschlagseile; Deutsche Fassung EN13414-3
- EN13414 Part 3 Steel wire rope slings - Safety - Part 3: Grommets and cable-laid slings;
German version EN 13414-3
Die laut Benutzerinformation vorausgesetzten Betriebsbedingungen und Einsatzbedingungen sind entsprechend einzuhalten.
The conditions of operation and use defined in the user information must be adhered to.
Wenden, 22.11.2005 Joachim Stöcker
Wenden, November 22, 2005
( Geschäftsführer, Dokumentations-Bevollmächtigter )
CAMCO Produktions- und Vertriebs-GmbH für Beschallungs- und Beleuchtungsanlagen, Fischpicke 5, 57482 Wenden, Germany
Tel.: +49-2762-408 0, Fax.: +49-2762-40810, Email: postmaster@camco.de, Web:
Geschäftsführer: Reiner Saßmann, Joachim Stöcker, Carsten Wegner
Copyright CAMCO GmbH 2009. All rights reserved. No part of this publication may be reproduced or transmitted in any form or by any means without the
express written consent of the publisher.
STEELFLEX-Rundschlingen_Benutzerinformation_BGVC1_2010-02-09 Rev. A
Name und Anschrift des Herstellers:
Name and address of the manufacturer:
Lift-All Company, Inc.
1909 McFarland Drive
Landisville, PA17538
USA
www.camcoaudio.com
Amtsgericht Siegen, HRB 7075
09/02/2010, Page 3 of 3

Werbung

loading