Assembly And Installation Of The Shelf - ONKRON TS1551 Bedienungsanleitung

4. Assembly and installation of the shelf

• Unscrew four bolts from the
shelf. Use a screwdriver.
• Insert half-ring into the shelf holder. Turn the half-ring to match its
position with the shelf-holder.
• Repeat the previous step with the second shelf-holder.
• Tighten bolts (1) and (3) using a screwdriver.
• Set desirable height for the shelf on the columns and fix half-rings
and shelf-holders with bolts (A2). Use key (F2). Make sure that all
bolts are securely fixed.
•
1
2
3
4
I n s t a l l s h e l f h o l d e r s b y
starting the bolts (1) and (3).
Look at the picture.
1 3
A2
F2
7