Installation Of The Columns To The Base - ONKRON TS1551 Bedienungsanleitung

2. Installation of the columns to the base

• Insert columns into the base. Cable management holes must be from
the back of the stand. Look at the picture.
• Use key (F2) to attach the columns to the base with bolts (A2) from
above.
A2
• Use key (F2) to screw bolts (A2) from
beneath of the base. Loot at the picture.
• Make sure that all bolts are secure fixed
and the whole construction is stable.
• Put plastic cover as shown on
the picture.
F2
A2
F2
5