Preliminary Adjusting And Fine Adjusting When Sighting In; Using The Posicon Turrets - Schmidt & Bender 3-12x50 Zenith Bedienungsanleitung

Operating Manual
Page 13 of 20
3-12x50 Zenith
5.

Preliminary adjusting and fine adjusting when sighting in

5.1 Using the Posicon turrets

For use of the turrets, please remove the caps from the windage and
elevation turret by unscrewing counter-clockwise (Illustr. 7).
Illustr. 7: Removing the caps from elevation and windage turret
Your new riflescope is equipped with the Posicon-windage and elevation
adjustment. On delivery, the black arrow in the white screen of the turret
indicator points onto the center, symbolized by an - o -.
This ensures that in both left-to-right and up-to-down direction the maximal
amount of adjustment range is available.
The arrow of the so called "Posicon-Clock" provides information on the
position of the reticle at any time (Illustr. 8).
The green sector indicates the square adjustment range in which one
windage and elevation adjustment do not interfere with each other. The red
sector indicates the so called buffer, which provides an additional amount of
adjustment in either direction, but in which one adjustment direction might
interfere with the other.
Schmidt & Bender GmbH & Co. KG • Am Grossacker 42 • D-35444 Biebertal
Tel. +49 (0) 64 09-81 15-0 • Fax +49 (0) 64 09-81 15-11
info@schmidt-bender.de • www.schmidt-bender.de