Werbung
GB
IMPORTANT INFORMATION
• There are no restrictions of use.
• Installation must be carried out in accordance with the latest edition of the Wiring Rules by
a qualified electrician.
• IMPORTANT. Ensure that ALL electrical connections are tight with no loose strands including
factory made connections.
• Mains supply voltage 220-240V 50/60Hz
• Class II, Double Insulated an earth is not required.
• For indoor use only
• Please Note: May not be compatible with PIR's. Please contact sales office for compatibility.
• There are no replaceable parts in this luminaire.
• We do not recommend mixing LEDs circuits with products such as extractor fans. This is
due to the sensitive nature of LEDs and is not product specific.
• Hereby, Aurora Limited declares that the radio equipment type AU-A1BTD10CW is in
compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is
available at the following internet address:
www.auroralighting.com/ProductDetail/AU-A1BTD10CW
FR
INFORMATIONS IMPORTANTES
• IL n'y a pas de restriction d'usage.
• L'installation électrique doit être effectuée conformément aux exigences de la réglementation nationale en
vigueur.
• Veillez à ce que TOUTES les connexions électriques soient bien serrées, en vous assurant que tous les
fils sont connectés, y compris les connexions d'usine.
• Tension secteur : 220-240V 50/60Hz
• Classe II, Double Isolation, la connexion à la terre n'est pas requise.
• Ces luminaires sont destinés à l'éclairage intérieur uniquement.
• Attention, ce produit peut ne pas être compatible avec certains détecteurs infra-rouge. Veuillez
contacter votre représentant pour de plus amples informations.
• Les LED étant des composants sensibles aux perturbations conduites par les lignes électriques, il n'est
pas recommandé d'installer des produits pouvant générer ce type de perturbation sur leurs lignes
électrique d'alimentation
• Aurora Limited déclare sous sa seule autorité que l'AU-A1BTD10CW sont conformes aux exigences de
la Directive Européenne 2014/53/ EU relative aux équipements radio fréquence. Le texte complet de la
déclaration de conformité aux exigences de la Communauté Européennes est disponible à l'adresse
internet suivante:
www.auroralighting.com/ProductDetail/AU-A1BTD10CW
DE
WICHTIGE INFORMATIONEN
• Es gibt keine Nutzungsbeschränkungen.
• Die Installation muss gemäß der neuesten Auflagen durch einen qualifizierten Elektriker
durchgeführt werden.
• WICHTIG: Bitte stellen Sie sicher, dass ALLE elektrischen Verbindungen inkl. der Anschlüsse nicht
frei liegen.
• Eingangsspannung 220-240V 50/60Hz
• Schutzklasse II, verstärkte und doppelte Isolierung zwischen Netzstromkreis und Ausgangsspannung.
• Nur für Innenanwendungen geeignet.
• Bitte beachten Sie: Nicht mit PIR Sensoren kompatibel. Kontaktieren Sie uns für weitere
Informationen.
• Leuchten auf einer normal entflammbaren Oberfläche installiert werden.Wir raten davon ab, LEDs
aufgrund ihrer Empfindlichkeit und Produktspezifikation mit Produkten wie z.B. Abluftventilatoren
zu nutzen.
• Hiermit erklärt Aurora Limited, dass die Funkgerätetypen AU-A1BTD10CW der
Richtlinie 2014/53/EU entsprechen. Die vollständige Konformitätserklärung ist
unter folgender Webseite abrufbar:
www.auroralighting.com/ProductDetail/AU-A1BTD10CW
GB
Setting up your smart Downlight with Connect.Control Remote (without App):
There is no need to download the App if you just plan to control your Downlight using the remote.
1
They will work 'out of the box' with the remote AU-A1BTRC1
2
For further instructions on remote functionality please review the Remote instructions.
3
Making adjustments to your scenes when using the Connect.Control Remote (With App):
Download the Aurora BLE app, and sign in using Username: Aurora and Password: 123.
1
Your devices will automatically appear in the App. There is no need to manually pair them.
2
You can edit scenes by pressing on the Scenes icon, long press on one of the 5 scenes, either adjust the brightness/colour of the
3
'Light' (individual Downlight) or 'Area' (all lights) in the scene to your preferred setting and press save.
Your Connect.Control remote will now recall your edited scene. There is no need to pair the remote to the app.
4
If you want to reset the scene then simply power off/on the devices 6 times and the factory settings will return.
5
Using the universal login details, the Bluetooth mesh is saved against these details and therefore you cannot change them. If you
6
want to set up your own details follow the next steps.
If you just want to pair your Downlight to the App without the Connect.Control functionality:
Ensure you have downloaded the Aurora BLE App.
1
We recommend only pairing one lighting circuit at a time otherwise, there is a risk other smart devices will be found on other
2
lighting circuits.
Ensure the wall switch for the lighting circuit is switched off before fitting the Downlight. Your Aurora Smart Downlight is fitted in the same
3
way that traditional household Downlight are fitted. Once fitted, ensure the Downlight is switched off until you are ready to pair your devices.
Open your App and go to the 'add devices' icon. Turn the Downlight on, it should automatically flash twice showing it is in pairing mode.
4
The Downlight should automatically show on the App pairing screen. Ensure all Downlight on the circuit have been discovered.
If any devices have not been found. Press 'Done' and delete all the devices and reset the Downlight by switching off/on six times.
5
After the sixth time they should flash three times. Follow Step 4 to pair your Downlight again.
Once complete, follow advice on the App to control your lights, create spaces, schedules and scenes.
6
Remember
To turn your Aurora Smart Downlight on or off remotely it must be switched on at the wall/fixture. Your Aurora Smart Downlight should
not be dimmed using a wall mounted dimmer switch as it may cause buzzing or flickering. Keep away from liquids and humidity, Use in
dry locations only. Not suitable for emergency lighting.
For Downlight with a weight significantly higher than that of the Downlight for which they are a replacement, attention should be drawn
to the fact that the increased weight may reduce the mechanical stability of certain luminaires and lightholders and may impair contact
making and Downlight retention.
The Downlight is based on protocol Bluetooth 4.2, to control on/off, CCT and brightness dimming it must be controlled through the App. This product is
not suitable for a dimming circuit.
Maintenance
Before replacing Downlight, turn off the mains power and let Downlight cool to avoid electrical shock or burns.
Disconnect your Aurora Smart Downlight before cleaning and keep it away from water and other liquids at all times.
The Aurora Smart Downlight does not contain any serviceable parts so do not attempt to open it.
RED Compliance
There are no restrictions of use.
Hereby, Aurora Limited declares that the radio equipment type listed within this guide are in compliance with Directive 2014/53/EU. The
full text of the EU declaration of conformity is available at the following internet address: auroralighting.com
Werbung
