Operations In The Case Of Failures - Gastrodomus ES110RGN Anweisung - Anwendung - Wartung

directions see initial cleaning. Clean the condenser located in the rear.
Before starting cleaning, close and protect the unit, then remove the dust
which has deposited on the front surface of the condenser using a broom
or vacuum cleaner.
Inactivity oft he device
During periods of inactivity, put the switch off and disconnect the plug,
accurately clean the unit, as per periodic cleanings, allow air to circulate in
the cell by covering the unit with a material that allows the device to
transpire.

8. OPERATIONS IN THE CASE OF FAILURES

If the device is not functioning, make sure that:
the plug has been correctly inserted into the socket;

the supply cord is not damaged.

If the pre-set temperature is not reached make sure that:
the thermostat is positioned from 1 to 7;

the condenser is not blocked with dust;

the device is not located near heat sources or its condensing unit is

not well-aired;
the stored foods or other objects do not inhibit the proper closing of

the unit;
the device is not working in anomalous conditions (overloaded,

loaded with hot food, or loaded in a way that prevents proper air
circulation).
If the device leaks water make sure that:
the water elimination device is not damaged, that the discharge

has been well channeled, and that is not blocked;
the device has been positioned at a flat level.

It the device is making a lot of noise make sure that:
does not have loose screws or bolts;

the device has been correctly leveled and the feet are fixed in a

stable position.
If after all these controls the malfunctioning continues, it is advisable to
contact the technical assistance, indicating the model trade name, the
serial number (both can be found on the technical data plate).
9. DUTIES WHICH MUST BE UNDERTAKEN BY QUALIFIED
ENGINEER
Replacement of spare parts:
Before commencing any maintenance work, disconnect the plug from the
mains.
10