Polaroid SprintScan 45 Ultra Schnelleinstieg Seite 9

5 Connect the Scanner to
AC Power and Turn On
1 Connect the power cord to the power connector (
a b
Power switch
a
b ).
Power connector
b
2 Turn the scanner power switch on.
Check the lights. The green light indicates power on. The
3
yellow light blinks while the scanner initializes, and it
remains steady when the scanner is ready. (The yellow light
also blinks during scanning.)
Turn the computer on.
4
Wait for the system to install the scanner driver and display
5
the normal desktop.
English 9