Polaroid SprintScan 45 Ultra Schnelleinstieg Seite 13

4 If the film is unmounted or the mount is thin, use the slide
spacer provided. Position the slide spacer on top of the slide.
The film should fit snugly into the adapter. (The spacer also
ensures that the image will be at the correct distance from the
scanning mechanism.)
Place the adapter in the 4x5 carrier, sliding the notches into
5
the pins on the left edge. The slide and tabs should be facing
up.
6 Close the carrier. Squeeze the carrier at the bottom edge and
turn the knob to lock it.
English 13