Werbung
FINAL-Modellbau
GLOBAL JET CLUB Europe
info@modellbau.de
Flaps:
Length from center screw to center screw: 79mm
3. Landing gear struts:
An adhesive grease is contained in the cylinder of the landing gear to achieve maximum
damping, this effectively prevents the model from jumping when landing. Especially on grass
runways and according to individual preferences, you can remove some or all of this grease,
which makes the landing gear softer and bounces more easily, but 'bounces' back out of the
springs more easily. Depending on your taste, this can be set by removing this grease or by
additional lubrication, for example with silicone oil.
© text and photos are property of FINAL-Modellbau - All statements without guarantee.
Seite - page 7 / 7
In den Stöcken 20
D-34305 Niedenstein
Phone: 0049 5624 922486
Werbung
