Using The Device - Philips AWP2980 Benutzerhandbuch

Using the device

Cleaning instructions before use
01
Remove all packaging from the
device and the lter.
04
Check if the sealing ring is intact
on the lter. Install the lter in the
device.
Flip-top lid
Control panel
Handle
Water tank
19
02
Clean the water tank with water or a clean
damp cloth. (Note: Please do not immerse
the device in water.)
05
Fill the tank with tap water to the max line,
and press the dispensing button to discard
3L of water to ush the device.
03
Fully charge the device until the
button shows constant red light.
06
The device now is ready for use.
Enjoy freshly ltered water.
Type-C USB charging port
Type-C USB cable