remis REMIcare van Montageanleitung Seite 9

A11
A12
A13
A14
Now position the coffer in the marked area at the door A11:
sealing proile. Make sure that the shutter does not slip out
of the coffer notch. Check the coffer's height position. The
arm of the loor rail has to rest on the loor cover (also see
A13).
Carefully guide the top guiding rail past the door sealing A12:
into the inside.
A13:
Finally, adjust the loor rail. The end cap should press itself
against the door sealing from the inside.
Screw the loor rail tight using the 2.9x16 countersunk A14:
bold (A).
US/GB
9/17