Nordmende CRT 14 Gebrauchsanweisung Seite 12

GB
Colour
Function: Select correct colour system.
A. Press [MENU] button repeatedly to select "Setup".
B. Using [P+] or [P-] button, select "COLOUR".
C. By repeatedly pressing [V+] or [V-] button to change as follows:
D. Press [MENU] to confirm.
AUTO means the colour system will automatically be set according to the software.
Normally, it should be set to "AUTO".
If the colour system is not appropriate selected, some colours may become missing.
Blue Back
Function: Setting Blue screen
When no signal is present one can select blue screen or plane raster using this option.
A. Press [MENU] button repeatedly to select "Setup".
B. Using the [P+]/[P-] button, select the "Blue Back".
C. Using the [V+]/[V-] button, select the "Yes " or "No".
D. Press [MENU] to confirm.
Language
Function: choose OSD language
A. Press [MENU] button repeatedly to select "Setup".
B. Using the [P+]/[P-] button select "Language"
C. Using the [V+]/[V-] button language will change to:.
English, Polski, Čeština, Türkce, Espaňol, Nederlands, Franςais, Deutsch, Portuguĕs, Italiano, Magyar, Eλληντχά, PyccnИЙ.
D. Press the [MENU] button to confirm your choice.
TXT Lang
Function: choose teletextlanguage
A. Press [MENU] button repeatedly to select "Setup".
B. Using the [P+]/[P-] button select "TXT Lang"
C. Using the [V+]/[V-] button language will change to:
English, Polish, Czech, Turkish, Spanish, Dutch, French, German, Portuguese, Italian, Hungarian/Swedian, Swidish, Serbian,
Russian,.Estonian, Greek.
D. Press the [MENU] button to confirm your choice.
Lock
Function: Lock or unlock television set
A. Press the [MENU] key repeatedly to select "Setup" menu
B. By pressing [P+]/[P-] button you can select "Lock".
C. Input the correct password.
The password is " 0000" by default.
D. The menu "Lock" will be visualized
E. Using the [P+]/[P-] button select the desired item.
F. By pressing the [V+]/[V-] keys, selected item that can be locked (ON) or unlocked (OFF)
Child Lock: When Child Lock is set to "On" then the Tuning Menu cannot be selected.
AV Lock: Euro AV can be locked or unlocked.
Vol limit sw: When this item is set to ON, the next item "Vol limit" will be active.
Vol limit: By pressing [V+]/[V-] keys, you can set the value of maximum volume limit.
Change Password: When this item is selected, pressing [V+]/[V-] keys, the Change Password menu will be appeared.
New Password: Input any new password you want.
Confirm: Input same number as in above item again. Press the [MENU] button to confirm your
G. Press [MENU] to confirm.
Note:
OSD will disappear after 5 sec. without operation.
The LOCK menu does not appear in the AV Mode
AUTO PAL SECAM
choice.
10
NTSC 4 NTSC 3