Connectland H-S002 Installationsanleitung Seite 2

Thank you for purchasing these USB speakers. They can be connected to your computer or any multimedia
peripheral and are powered by USB port. You just do need to connect to Jack stereo plug. The sound signal is
transmitted via Jack plug. You can set sound volume through integrated volume button. You can merge speakers set
into one sound bar. LED indicator lights on showing that speakers are powered and ready to start working.
Features
Rated power: 2 x 2.5 W
S/N ratio > 45 dB
Frequency response headset: 100 Hz – 20 000 Hz
Plug: USB, 3.5mm Jack stereo
Installation and utilization
 Plug and play: no program installation is needed to use it as a common USB in Windows OS
 You have just to plug the speakers to USB port of your desktop computer or of your notebook, and the Jack plug
to Line In of your sound card
 Place the speakers on plane surface. The position and the distance of the speakers can be set as you wish
 To reunite the 2 speakers into 1 soundbar, place face to face the higher parts of the speakers with letters R and L.
They will automatically joined into one soundbar.
 Adjust volume level at reasonable level
 Do not disassembly or modify product
 Do not use product with wet hand
 Avoid product from dust or hot place
 Keep product away from water
FAQ and troubleshooting
If you can not hear any sound :
 Make sure you have plugged correctly the speakers and check sound card is working.
 Check volume level on the speaker and in the operating system.
 Check that USB port is not defective by testing another USB device such as USB mouse or keyboard
This product is in compliance with the essential requirements of the European Directives for which it is concerned.
You can download declaration of conformity on the website : http://www.connectland.eu
Copyright © 2011. Connectland. All rights reserved
H‐S002 USB SPEAKERS
INSTALLATION GUIDE
1
ES