Operation And Functions - TaoTronics TT-BH051 Anleitung

Note:
• The earbuds can remember the devices paired previously, and will attempt
to pair with the last connected device. If re-pairing failed, the earbuds will
enter pairing mode.
• It is not recommended to wear the two earbuds on different people. If
necessary, please keep the two earbuds close to each other in couple
earbuds mode.
Single Earbud Mode
1. Take out one earbud from the charging case, and make sure the other one is
placed in the charging case and the lid is covered.
2. It will try to pair with the last paired device first then enter pairing mode with
its LED indicator flashing blue and white alternately if pairing failed.
3. Turn on the Bluetooth function on your device and search for nearby
devices. Find "TaoTronics Duo Free Pro"in the searching results, tap on the
name to connect.
4. Once connected, the LED indicator will flash blue slowly.
Note:
If you want to change to couple mode, simply take out the other earbud
from the charging case, they will pair with each other automatically.
Clear Pairing List
If you failed to pair your device with the earbuds, please clear the pairing
history as instructed below:
1. If you have paired your device with the earbuds before, remove "TaoTronics
Duo Free Pro" from the Bluetooth device list first.
2. Uncover the lid and make sure both earbuds are placed in the charging
case.
3. Press and hold the Reset Button for 10 seconds until the indicator flashes
white three times. The pairing history is then cleared.
4. Take them out to re-pair with your Bluetooth® device as instructed in
"Pairing" section.
Note:
If you want to pair the earbuds with another device when you have already
paired them with a device, deactivate the Bluetooth function on the paired
device or remove "TaoTronics Duo Free Pro" from its Bluetooth list. Restore
the earbuds to factory settings as instructed above if pairing failed.
05

OPERATION AND FUNCTIONS

Function Operation
• Tap the Touch Control on either of the
Play / Pause earbuds twice under music
• Put on / take off the earbuds
Tap the Touch Control on the
Volume +
right earbud
Tap the Touch Control on the
Volume -
left earbud
Tap the Touch Control on the
Next Track
right earbud three times
Tap the Touch Control on the left
Previous Track
earbud three times
Answer Phone
Tap the Touch Control on either of
Call
the earbuds once
Hang Up Tap and hold the Touch Control on
Phone Call either of the earbuds for 2 seconds
Decline an Tap and hold the Touch Control on
Incoming Call either of the earbuds for 2 seconds
Only available in Couple Earbuds and
Non-call Mode after connecting with phone:
• Tap and hold the Touch Control on
the left earbud for 2 seconds to turn
Turn On / Off
on Ambient Mode.
Ambient Mode
• Limited by mobile protocol, you may
experience a short pause when
turning on music or sounds under
Ambient Mode.
Couple Earbuds Mode:
Tap and hold the Touch Control on the
Turn On / Off right earbud for 2 seconds
Voice Control Single Earbud Mode:
Tap and hold the Touch Control on
either of the earbuds for 2 seconds
Clear Pairing
Refer to the "Clear Pairing List" section
List
Go into Pairing
Refer to the "Pairing" section
Mode
Voice Prompt
/
Toots when highest
setting is reached
/
/
/
/
/
Call rejected
Toot
Toot
/
Pairing
06