Mode Conversion; Unit Conversion - Weighstation DE121 Bedienungsanleitung

Mode conversion

1. Press " " to turn on.
2. Press " " to select desired mode.

Unit Conversion

If the scale is with both unit systems of metric (g,
ml) and Imperial (lb:oz, fl'oz), press "
choose working mode (weight, milk volume, water
volume). Then press "
convert between two systems.
Take the conversion of weight unit for example:
• When setting "g" as weight unit, the default
volume unit is "ml".
• When setting "lb:oz" as weight unit ,the default
volume unit is "fl'oz".
To Start Weighing
Weighing mode
1. Place the bowl included on the scale (if
necessary).
2. Press " " button to turn on. Wait until
LCD shows "0".
3. Press " " to convert to weighing mode.
4. Load weighing object on the scale (or in the
bowl) to start weighing. LCD will show the
weight reading.
5. If the weighing object is water or milk, press
" " to choose volume mode and view the
volume of weighing object.
DE121_ML_A5_v1_20201221.indb 3 DE121_ML_A5_v1_20201221.indb 3
Volume indication mode
1. Press "
2. Press "
3. Put a liquid container onto the scale platform.
4. Press "
5. Pour liquid (water or milk) into the container.
6. Press "
"ZERO" or "TARE" function
To weigh different loads consecutively without
removing previous loads from the scale:
1. Put first Load on the scale and get weight
2. Press "
" to
" conversion button to
Condition 1: "ZERO" function
When total sum of all loads on scale is ≤4% of
scale's maximum weight capacity (4% here means
200g with this scale), LCD will show "-----" or "0 g"
each time "
"-----" means reading is not stable. Please wait for
a moment. "0 g" and meanwhile an icon "O" on the
left side of LCD indicate ZERO function is activated.
In this case, maximum weight capacity remains
unchanged.
Condition 2: "TARE" function
When total sum of all loads on scale is >4% of
scale's maximum weight capacity (4% here means
200g with this scale), LCD will show "-----" or "0 g"
each time "
"-----" means reading is not stable. Please wait for
a moment. "0 g" and meanwhile an icon "T" on the
left side of LCD indicate TARE function is activated.
In this case, maximum weight capacity is reduced
by total weight of all loads.
" to turn on. Wait until LCD
shows "0".
" to choose "Water" or "Milk"
mode.
LCD shows the weight of container.
to reset the reading to "0".
LCD shows the volume of the liquid.
" to choose "Weight" mode and
view the weight of liquid.
reading.
" to reset the reading to "0"
before adding next load. You can repeat this
operation.
" is pressed.
" is pressed.
EN
3
2020/12/21 17:31 2020/12/21 17:31