Troubleshooting Guide; Cleaning And Maintenance - TaoTronics SoundLiberty Pro S10 Anleitung

Manually Pairing
If you want to pair the earbuds with a new device.
1. Place both earbuds back in the charging case with the lid uncovered.
2. Press and hold the Reset Button for 3 seconds until the LED indicators on the
charging case flash white twice.
3. The earbuds will go into pairing modeautomatically.
Resetting Your Earbuds
1. Remove "TaoTronics S10" from the Bluetooth device list.
2. Place both earbuds back in the charging case with the lid uncovered.
3. Press and hold the Reset Button for 10 seconds until the LED indicators on the
charging case flash white three times.
4. The pairing history will be cleared and the earbuds will go into pairing
mode automatically.

CLEANING AND MAINTENANCE

• Wipe only with a dry, soft cotton swab or equivalent.
• Never insert anything into the nozzle.
• Clean the earbuds and the charging case regularly.
• Keep away from sharp objects to avoid scratches.
• Place in a dry and shady place if they are not in use for a long time.
• DO NOT clean with detergent or chemicals.
07 SoundLiberty Pro S10

TROUBLESHOOTING GUIDE

Earbuds fall off easily :
Securely wear the earbuds (see "Wearing").
Wearing
Cannot connect with your device :
• Make sure the Bluetooth function is activated before pairing.
• Place the device to be connected close to the earbuds.
Move both devices away from other Bluetooth devices.
• Remove the earbuds from the Bluetooth list when
already paired before.
• Reset the earbuds and pair again
(see "Resetting Your Earbuds").
Intermittent connection for one of the earbuds :
• Make sure there are no obstacles between the two devices.
• Fully charge the earbuds.
Bluetooth
• Reset the earbuds and pair again
Connection
(see "Resetting Your Earbuds").
Bluetooth disconnected frequently :
• Make sure the earbuds are within the effective range
of your device. The range may vary with the
environmental circumstances.
• Turn off other Bluetooth devices to decrease
the interference.
• Remove the earbuds from the Bluetooth list and
connect again.
SoundLiberty Pro S10 08