Cadac i-Braai Handbuch Seite 3

4. Powering On & Off
To turn on the i-Braai follow these steps:
• Make sure the probe is installed
• Press the power button located at the centre of the faceplate once.
• Press the power button again quickly to change between Celsius and Fahrenheit.
To turn off the i-Braai follow these steps:
• Press and hold down the power button located in the centre of the faceplate for several seconds.
5. Connecting
To connect your i-Braai to your iPhone®, iPad®, iPod touch® or Android™ device follow these steps:
• Open Settings.
• Set Location to On.
• Tap Bluetooth®.
• Set Bluetooth® to On.
• While turned on, place your i-Braai thermometer next to your smart device and open the i-Braai App.
• Select "Search" in the centre of the screen.
6. Disconnecting
To disconnect your i-Braai device from your iPhone®, iPad®, iPod Touch® or Android™ device, follow these steps:
• While turned on, place your i-Braai next to your smart device and select the home screen.
• Tap "Pair" in the top left corner of the screen.
• Tap "Disconnect" in the centre of the screen.
7. Positioning of magnetic base
• The base of the i-Braai is magnetic for convenient positioning on a cool portion of your grill, smoker or other magnetic
surfaces.
• The magnetic base is not designed to withstand high heat and it must be placed on a cool surface.
8. Probe
• Meat probes should always be inserted into the centre of the item being cooked for an accurate temperature reading.
• When using the standard meat probe, be sure to route the probe wire where it will not be exposed to flames or temperatures
exceeding 572°F / 300°C).
• The probe should be cleaned by hand with a damp towel or sanitary wipe. The probe is not dishwasher safe. Take precaution
not to get the wiring of the probe wet.
• Be sure to avoid water exposure to the wiring of the probes as well as the area where the wiring and crimp meet the probe.
• The probe is not waterproof and damage may result from water exposure.
• The probe should never be submersed in water.