Quick Start Instructions - Cadac i-Braai Handbuch

CAUTION
GB
This product gets used with products in connection with hot surfaces.
IMPORTANT
Read these instructions carefully so as to familiarise yourself with the product.
Retain these instructions for future reference.
1. General
Thank you for purchasing the i-Braai thermometer.
To get started, simply follow the below steps to help guide you on how to set up and how to operate the app and its functions.
2. In the box
• 1x i-Braai thermometer
• 1x Coin cell battery (installed)
• 1x Meat probe
• 1x Magnetic base

3. Quick start instructions

Download the CADAC i-Braai app from the App Store® or Google PlayTM store by typing in "i-
Braai" as the keyword in the search bar (See Fig. 1 for app icon).
The CADAC i-Braai is compatible with the following devices:
• iPhone® (4S and later)
• iPad® (3rd generation and later)
• iPad mini™ (all generations)
• iPod touch® (5th generation and later)
Fig. 1
• Android™ devices equipped with
• Bluetooth® 4.0 and running Android™ software version 4.3 or later
Separate the i-Braai from its base by firmly holding the base with one hand and gently pulling the
i-Braai top upwards with the other hand. On the underside of the i-Braai, turn and open the battery
cover by twisting it counter-clockwise, remove the plastic lint and replace the cover. (Fig.2)
Place the i-Braai top back onto its base.
Plug the probe into the probe port of the i-Braai.
Enable Location and then Bluetooth® on your smart device under 'Settings'.
Tap the power button located at the bottom of the faceplate.
Open the CADAC i-Braai App on your smart device.
Press on search in the centre of the app and it will automatically pair with your i-Braai
Fig. 2
thermometer (Fig. 3 and 4).
You are now connected and
ready to use your i-Braai.
(Fig. 5)
Fig. 3 Fig. 4 Fig. 5