MDD LOK04 Montageanleitung Seite 7

The factory preset combination is 0-0-0-0,
Close Position Guide Line
Knob Dials
Open Position
Decoding Panel
Reset Lever
The factory preset combination is 0-0-0-0,
1. Leave the dials at
preset combination
0-0-0-0. (Fig. A)
Fig. A
How to decode the forgot combination
1. Insert the correct Master Key.
Turn the Master Key clockwise
to open the door.
NOTE: Do NOT remove the key
!
at the moment. (Fig. E)
Fig. E
The Master Key operation may be used at any time to open a lock in an emergency.
Always keep your secret combination in a safe and accessible place for future reference.
How to operate your lock
TO OPEN:
Turn the dials and align the
opening combination numbers
with the Guide Line.
Turn the knob to the open
position.
Due to various cabinets, you may need to turn the "Knob" 90 or 180
to operate your lock.
How to reset your combination
2. Turn the Knob
to the open
position. (Fig. B)
Fig. B
2. Make sure to turn the Master Key counterclockwise back
and then remove the Master Key from the lock.(Fig. F)
3. Press down the Decoding Panel, keep holding it
and rotate the dial till the Decoding Panel sinks or
there is a "click" sound. (Fig. G).
Repeat the same process for all dials,
you will get the opening numbers.
even though the dials may appear in other numbers.
even though the dials may appear in other numbers.
3. Push the Reset Lever
on the back of lock from
"A" to "B" position. (Fig. C)
Set your own desired
combination.
B
A
Fig. C
TO LOCK:
Turn the knob to the
close position.
4. Return the Reset Lever
back to "A" position. (Fig. D)
Your lock is now ready
to open at its new
combination.
B
A
Fig. D
Fig. F
Press
Fig. G