Customer Service/Support; De-Commissioning; Drawings And Replacement Parts; Idling And Disposal - ABNOX AXDD-Serie Gebrauchsanweisung

Customer Service/Support

ABNOX AG
Langackerstrasse 25
CH-6330 Cham
Switzerland
Tel. +41 (0) 41 780 44 55
Fax +41 (0) 41 780 44 50
E-Mail info@abnox.com
Internet www.abnox.com

De-Commissioning

Brief Interruptions: In the event of short interruptions (overnight or just over the
weekend), shut down the product. The system must be de-pressurised.
Long-Term Interruptions: In the event of a longer-term interruption (more than three
days), the following points should be observed:
 The main switch must be shut down
 The system must be de-pressurised

Drawings and Replacement Parts

Accessories, drawings, dimensioning sheets, data sheets and replacement parts can
be found at www.abnox.com.

Idling and Disposal

When de-commissioning/idling the product, please heed the following points:
 The system must be depressurised.
 The medium must be removed and properly disposed of.
ENVIRONMENTAL HAZARD
The various materials /liquids must be properly and separately handled
and disposed of in compliance with the applicable national ordinances.
Lubricants are considered hazardous waste.

Publisher's Copyright

©
This document may only be reproduced, translated or made accessible to third
parties with the expressed consent of the publisher.

Re-Sale

This instruction manual is a component of the product and belongs in the scope of
delivery in the event of re-sale.
EN
15