Werbung
Verfügbare Sprachen
Verfügbare Sprachen
KVM-TEC SVX1 Ver. 1.4
To get into the extender Menu the "Scroll Lock" button on the keyboard
witch is connected via USB to the extender has to be pushed 5 times.
The menu window appears. ( Pic.1)
Menu USB High Speed
U
= Update Flash FW
M
= USB Memory Option
L
= Lock Menu disabled
I
= Monitor sync disabled
Q
= Exit
Remote (Mon) FW Ver=9987
Local
(PC)
FW Ver=9987
The "U" starts the firmware update. The latest version of the firmware
can be found at www.kvm-tec.com.
An exact update description is attached to every update file.
By pushing "M" the USB-Memory option can be activated. This allows to
use USB mass storage devices over the extender. If the USB-Memory
option is already activated it can be en- or disabled. If the Extender has
no Memory option, it can be reorder. In this case the device ID is shown
(Pic.2). Please contact your trader and send him the device ID. An
unlock code will be send back. This code has to be typed in. After
entering the code the extender will reboot. Now the add-on "Memory" will
appear in the title of the menu.
USB High Speed Memory
Option
Enable: send ID to
distributor
ID
= 3fe687d5
Enter matching code
code = --------
kvm-tec electronic gmbh
Tel +43-2253 / 81912 – Fax +43 2253 819 12 99 – Email
Pic.2
– 2522 Oberwaltersdorf –
Pic.1
Kulturstrasse 1 – Austria
office@kvm-tec.com
- 6
www.kvm-te c.com
Werbung
