How To Use Your E-Bike - Littium Berlin Nutzerhandbuch

How to Use your E-Bike

The battery that has been installed in the rear carrier comes with a switch on its left side. When pus-
hing this switch, the E-Bike´s electric current is activated.
Once you have switched on the electric current of the E-Bike, press and hold the LCD display's
power button for a few seconds to turn on the bike.
The battery has a charge indicator on its upper side. By pressing it when the battery is on you will be
able to check the level of the charge.
When going up steep hills, we recommend using levels 4 or 5 of the PAS assistance.
To turn on the lights of the E-Bike, press and hold the button – during a few seconds. To turn them off,
repeat this procedure.
When stopping using your E-Bike, remember to turn off the LCD display and the switch placed on the
left side of the battery, so that you cut off the power supply.
44