Renkforce BX6600 Bedienungsanleitung Seite 3

Operating Instructions
BX6600 Optical wireless mouse
Item No. 2203080
Intended Use
The wireless computer mouse is used to operate a computer. The control commands
are transferred using a radio signal (wireless). FSK Auto-Link technology establishes the
connection between the mouse and computer fully automatically. The mouse is particularly
suited for use with notebooks.
It is intended for indoor use only. Do not use it outdoors. Contact with moisture, e.g. in
bathrooms, must be avoided under all circumstances.
For safety and approval purposes, you must not rebuild and/or modify this product. If you use
the product for purposes other than those described above, the product may be damaged. In
addition, improper use can result in short circuits, fires or other hazards. Read the instructions
carefully and store them in a safe place. Make this product available to third parties only
together with its operating instructions.
This product complies with the statutory national and European requirements. All company
names and product names are trademarks of their respective owners. All rights reserved.
Delivery Content
• Wireless mouse
• Receiver
• Operating instructions
Up-to-date Operating Instructions
Download the latest operating instructions at www.conrad.com/downloads or
scan the QR code shown. Follow the instructions on the website.
Explanation of Symbols
The symbol with the exclamation mark in the triangle is used to indicate important
information in these operating instructions. Always read this information carefully.
The arrow symbol indicates special information and advice on operation.
Safety Instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information
on proper handling in this manual, we assume no liability for any resulting
personal injury or damage to property. Such cases will invalidate the warranty/
guarantee.
a) General Information
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. This may become
dangerous playing material for children.
• Protect the appliance from extreme temperatures, direct sunlight, strong jolts, high
humidity, moisture, flammable gases, steam and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of operation and
protect it from any accidental use. Safe operation can no longer be guaranteed
if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
• Please handle the product carefully. Jolts, impacts or a fall even from a low height
can damage the product.
• Consult an expert when in doubt about the operation, safety or connection of the
appliance.
• Maintenance, modifications and repairs must only be completed by a technician
or an authorised repair centre.
• If you have questions which remain unanswered by these operating instructions,
contact our technical support service or other technical personnel.
b) Connected devices
• Also observe the safety and operating instructions of any other devices which are
connected to the product.
c) (Rechargeable) Batteries
• Correct polarity must be observed while inserting the (rechargeable) battery.
• The (rechargeable) batteries should be removed from the device if it is not used
for a long period of time to avoid damage through leaking. Leaking or damaged
(rechargeable) batteries might cause acid burns when in contact with skin,
therefore use suitable protective gloves to handle corrupted (rechargeable)
batteries.
• (Rechargeable) batteries must be kept out of reach of children. Do not leave
(rechargeable) batteries lying around, as there is risk, that children or pets swallow
them.
• All (rechargeable) batteries should be replaced at the same time. Mixing old and
new (rechargeable) batteries in the device can lead to (rechargeable) battery
leakage and device damage.
• Rechargeable batteries must not be dismantled, short-circuited or thrown into fire.
Never recharge nonrechargeable batteries. There is a risk of explosion!
Operating Elements
1 2
1 Scroll wheel 5 Back button
2 Right mouse button 6 Forward button
3 Left mouse button 7 Receiver
4 Resolution button 8 Lock button
Operation
a) Using the 2.4 GHz receiver
1. There is a receiver dock under the battery compartment cover on the rear side of the
mouse. Remove the wireless receiver (7) from the receiver dock. It has a USB-A connector.
2. Insert it in a free USB port on your computer.
b) Inserting batteries
1. Remove the battery compartment cover on the rear side of the mouse. To do this, slide the
lock button (8) in the direction of the arrow while removing the cover.
2. Insert one Type AA/Mignon battery (not included) with correct polarity in the battery
compartment (9) of the mouse (observe plus/+ and minus/-).
3. Close the battery compartment.
In principle, it is possible to operate the mouse with rechargeable batteries. Due
to lower voltage (rechargeable battery = 1.2V, battery = 1.5V) and lower capacity
of rechargeable batteries, the operating time is shorter than with batteries. There
is also a probability of reduction in radio range. If you wish to use rechargeable
batteries in spite of these limitations, it is imperative that you use special NiMH
rechargeable batteries with low self-discharge. We recommend that you preferably
use high quality alkaline batteries to ensure long and safe operation.
Replace the batteries every year at least.
3 4
6 5
10 9 8 7
9 Battery compartment
10 Optical sensor