Herunterladen Inhalt Inhalt Diese Seite drucken

glass 1989 HSH Bedienungs- & Wartungsanleitung Seite 40

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 62
elapsed, the stove switches off. Then the
system switches to "stand-by" mode.
SAUNA TEMPERATURE
To set the desired temperature, press the
"MENU" key.
EN
The display shows the temperature value
set for the sauna. Within 10 seconds (LED
keys
and
press the "MENU" key, switching to the
next SESSION DURATION setting.
NOTE:The temperature value set
remains stored and will be maintained
even when the display is switched on
the next time.
SESSION DURATION
The remaining operation time is shown
on the lower line of the display.
After having set the temperature, press
the "MENU" key to set the SESSION
DURATION.
Set the desired value using keys
(between min. 1h and Max. 6h) within
10 seconds (LED
"MENU" key, or wait for the value to be
stored automatically after 5 seconds.
PROGRAMMED SWITCH-ON
To set the desired switch-on time, press
the "MENU" key twice. On the display the
LED
By pressing key
maximum pre-set operation time of
6:00h, one switches to PROGRAMMED
SWITCH-ON, indicated on the display by
the icons (A) in the picture below:
One can now set the desired programmed
switch-on time.
Set the desired value using keys
and
Min 10 minutes with 10-minute
increments) within 10 seconds (LED
(between min. 40ºC and
until exceeding the
and the symbol (A) stay on, making
the count-down start.
The lower line of the display (B) shows
the count-down relating to the remaining
pre-set time. When this value reaches
zero, the stove switches on automatically.
NOTE: the programmed switch-on
time set does NOT remain stored the
next time the display is switched on.
LIGHT
By pressing key
sauna light on and off.
The light is independent from other
functions.
NOTE: See lamp assembly instructions for
the characteristics of the bulb to be used.
FAN
(not supplied with the sauna)
If there is a fan installed in the sauna, it
can be connected to the control unit and
controlled by the command mentioned
and
above.
By pressing the button
the fan on and off. The fan is independent
from other functions.
8
one can switch the
one can switch

Werbung

Inhaltsverzeichnis
loading

Verwandte Produkte für glass 1989 HSH

Diese Anleitung auch für:

MemoNuvolaRopePasodoble

Inhaltsverzeichnis