Troubleshooting; Disposal; Translation Of The Original Conformity Declaration - OWIM HG02971 Bedienungs- Und Sicherheitshinweise

Troubleshooting

Q
= Fault
= Cause
= Remedy
= The vehicle jack does not raise the vehicle
at all or does not raise it high enough.
= The release valve
= Close the release valve
the section on "Raising the vehicle").
= There is not enough hydraulic oil in the
vehicle jack.
= Top up the hydraulic oil (see the section on
"Topping up the hydraulic oil / greasing").
= There is too much hydraulic oil in the cylinder.
= Remove the excess quantity of hydraulic oil
from the cylinder.
= There is air in the hydraulic system.
= Remove the air in the hydraulic system (see
the section on "Removing air from the hydrau-
lic system").
= The vehicle jack gives way under load.
= The release valve
= Close the release valve
the section on "Raising the vehicle").
= Hydraulic oil escapes.
= There is too much hydraulic oil in the cylinder.
= Remove the excess quantity of hydraulic oil
from the cylinder.
= The pump mechanism works only partially.
= There is too much hydraulic oil in the cylinder.
= Remove the excess quantity of hydraulic oil
from the cylinder.
= There is air in the hydraulic system.
= Remove the air in the hydraulic system
(see the section on "Removing air from the
hydraulic system").
10 GB/IE/NI
was not properly closed.
5
completely (see
5
was not properly closed.
5
completely (see
5

Disposal

Q
The packaging is made entirely of recyclable
materials, which you may dispose of at local re-
cycling facilities.
Contact your local refuse disposal authority for
more details of how to dispose of your worn-out
product.
Dispose of the hydraulic oil in an environmentally
compatible manner. Ask your local repair garage
to see to its disposal or find your nearest waste
materials collection centre.
Translation of the original
Conformity Declaration
We, OWIM GmbH & Co. KG Stiftsbergstraße 1,
DE-74167 Neckarsulm, GERMANY, hereby
declare under our sole responsibility that the
product: Hydraulic Bottle Jack, Model No.:
HG02971, Version: 06 / 2019, to which this
declaration refers, complies with the directive of
2006/42/EC.
Related harmonised standard:
EN 1494/A1: 2008
Serial number: IAN 322261_1901
Tobias Koenig
Division Manager
Neckarsulm, 06.03.2019
The complete declaration of conformity can be
viewed at: www.owim.com