Installation - Mellerware Comfy! Gebrauchsanweisung

CONTROL PANEL
2 – Heating power indicator
3 – Comfort mode indicator
4 – ECO mode indicator
5 – Screen
6 – Mode button
8 – Button +
9 – Open window function button
10 – Timer button
11 – Button –
If the model of your appliance does
not have the accessories described
above, they can also be bought
separately from the Technical
Assistance Service.

Installation

Be sure to remove all packaging
–
material from inside the appliance.
The appliance requires suitable
–
ventilation in order to work
properly. Leave a space of more
than 36 cm between walls or other
obstacles and more than 20 cm
The plug must be easily accessible
–
so it can be disconnected in
an emergency.
–
from the appliance it should be
situated in a place where the
atmospheric temperature is
between 12 and 32˚C.
The appliance should work well
–
with its wall support attached or
with its base/feet attached.
ASSEMBLING THE WALL BRACKET
The appliance has a wall bracket
–
(E) on which it can be supported.
Fix the wall bracket as you think
–
appropriate, using plugs, screws,
and adhesive...
Taking into account the separation
–
distances mentioned above, place
the wall support in the required
position and mark the drilling
points on the wall. (Fig.1).
Drill into the wall where marked and
–
insert the rawlplugs. (Fig.2).
Follow the instructions (Fig. 3, 4, 5).
–
–
twice the weight of the appliance.
FITTING THE BASE FEET
The appliance has anti-slip base
–
feet (C) that support the product.
To assemble the base feet, place
–
the appliance face down.
Position the base feet on the body
–
of the appliance.
Position the base feet on the body
–
of the appliance using the screws.
(Provided with the appliance)
(Fig.6).
Stand the appliance up again
–
so as to check that the base
feet work properly.
Instructions for use
BEFORE USE
Some parts of the appliance
–
have been lightly greased.
–
appliance is used a light smoke
EN ES